| | Description | Additional Information |
| Plant | Laser Engraver/Cutter with 45W CO2 laser source by Universal Laser Systems. | |
| Technoloy | Burning out or vaporizing material with the laser ray. | |
| Printing Stock | - self-adhesive media (papers and foils)
- engraved laminates (double sided)
- Alumark aluminium sheets
- black anodized aluminum
- stamp plates
- wood
- glass
- marble
- leather and false leather
- plexi
- materials of your choice (tests have to be carried out) | 1. We do not engrave metals.
2. Engraving anodized aluminium means that aluminum anodizing dye is burnt out.
3. False leather engraving (personalized calendars) - please choose calendars where the top layer of the false leather contrasts with the colour of the bottom layer (to check this please carry a test and scrape off with a sharp tool a bit of dye on the backside of the cover).
See materials engraved with a marking laser. |
| Working Area | 600 x 450 mm | |
| Resolution | Engraving in 400dpi resolution. | |
| Image of the engraved surface | Matt, in colour of base material. | Large engraved areas can be textured with delicate parallel lines - traces after ray penetration. |
| Cutting Size | Laser can cut any shape needed and required.
Cutting tolerance for signboards and labels comes up to - ± 1mm.
| If you need to fit the cut product into specific dimensions please remember that during cutting laser burns out material so finished product is slightly smaller than this in application file. Tests have to be carried out to set correct dimensions of the artwork. |
| Usage | - labels cutting
- stamp plates engraving
- signs and placards
- plaques and awards engraving
- rating plates
- describing the front panel of device
- personalizing gifts | See other applications of the marking laser. |
| Usage Limitations | - - we do not engrave metals on this machine
- Engraving unknown materials (products) requires carrying out tests to set optimum parameters - for that reason two product copies have to delievered. Each time engraving result has to be approved by the buyer.
| |
